How to wrap tape, auto harness wrapping process (2

3. Full wrapping (close wrapping):Adhesive Tape

The overlapping part Zhi of the winding tape is less than 50% of the width of the tape, and 2-3 turns are required at the beginning and end.

No wires are allowed to be seen in the area where the tape is completely wrapped. The end of winding tape shall be neat without warping / disengagement. It should be noted that the elongation of the tape shall not exceed 40mm. (there will be different standards between various industries and OEM)

Λ 4. Cross windingAdhesive Tape

1) Winding direction of t-node

2) Winding direction of cross node (4 turns in total)