How to wrap tape, auto harness wrapping process (3)

3) Winding direction of cross node (5 turns in total)

4) Winding direction of v-node (3 turns in total)

5) Winding direction of v-node (6 turns in total)

6) Winding direction of large node (7 turns in total)Adhesive Tape

5. Tape wrapping on bellows

1) Use the upper pipe opener to open the bellows

2) Check whether the wires are exposedAdhesive Tape

3) The pipe orifice shall be aligned to avoid out of tolerance of pipe lengthAdhesive Tape

4) When the spacing on the pipe is wrapped, the edge of the pipe shall be wrapped with a wide point of adhesive tape. Otherwise, the adhesive tape will fall off easily.