Characteristics of different Automotive Masking Tape * 3M double-sided adhesive tape

Characteristics of different Automotive Masking Tape * 3M double-sided adhesive tape

1. The double-sided adhesive tape of non-woven base material has good viscosity and processability. It generally has long-term temperature resistance of 70-80 ℃, short-term temperature resistance of 100-120 ℃, and the thickness is generally 0.08-0.15mm.

Suitable for inscription board, plastic fitting, automobile, mobile phone, electrical appliances, sponge, rubber, signs, paper products, toys and other industries, home appliance and electronic instrument parts assembly, display lens.

2. The double-sided adhesive without substrate has excellent bonding effect, can prevent falling off and excellent * performance, good processability and temperature resistance, short-term temperature resistance of 204-230 ℃, general long-term temperature resistance of 120-145 ℃, and general thickness of 0.05-0.13mm.

It is suitable for the bonding of nameplate, panel and decorative parts.

3. The double-sided adhesive of pet substrate has good temperature resistance and strong shear resistance. Generally, the long-term temperature resistance is 100-125 ℃, the short-term temperature resistance is 150-200 ℃, and the thickness is generally 0.048-0.2mm.

It is suitable for the bonding of nameplate, LCD, decorations and decorative parts.

4. The double-sided adhesive tape of foam base material has the advantages of softness, good adhesion, good initial viscosity and holding viscosity, good solvent resistance and UV resistance, general thickness of 0.4-1.0mm, short-term temperature resistance of 130-150 ℃ and long-term temperature resistance of 80-93 ℃.

It is applicable to the bonding of air conditioners, office furniture and communication products. It can replace the screw fixation design to make the products * beautiful.

5. The hot melt adhesive film has good consistency, uniform bonding thickness, no solvent, easy processing, and good adhesion to many objects. The thickness is 0.1mm, the color is translucent / amber, and the hot melt softening temperature is 116-123 ℃.

Applicable to the bonding of nameplate, plastic and hardware; Good results can also be obtained by bonding on uneven surfaces. The recommended initial bonding conditions are: temperature 132-138 ℃, bonding time 1-2 seconds, and pressure 10-20 psi.