How to wrap tape, auto harness wrapping process (4)

5) When the pipe end is not sealed, the adhesive tape shall be pasted flat on the rubber pipe mouth, no more than 3mm from the pipe edge

6. Wrapping tape at bellows endAdhesive Tape

It is required to be fixed firmly and pull the bellows axially with a force of 20n (if any, according to the customer's requirements). The winding tape and pipe shall not be displaced, and the exposed line shall be pulled off;Adhesive Tape

1) Sealing and fixing of left end of open and closed bellows

2) Sealing and fixing of right end of open and closed bellows

3) Winding technology of pipe joints